Titan FB Series Flatbed Fibre Lasers

The Titan FB Series is a production-duty dual-shuttle flatbed fibre laser range built for manufacturers that need continuous sheet processing with practical workshop access. Full-height side doors and side operation make sheet handling, inspection and daily loading easier — particularly where crane paths, aisle width or adjacent equipment limit front-only access. The F3015B provides a 3000 × 1500 mm cutting area with 3kW, 6kW or 12kW power; the F4020A extends the same side-access shuttle concept to 4000 × 2000 mm with the same power options.

Across both models, one table cuts inside the enclosed work zone while the second waits outside for loading and unloading. The FB Series suits subcontract workshops, sheet metal manufacturers and engineering companies running laser cutting throughout the shift — where shuttle throughput, heavier plate capacity and side access together justify production investment over fixed-table or compact shuttle alternatives.

Side door access

Full-height side doors give practical lateral access to the exchange table for loading, unloading, inspection and maintenance — particularly where crane paths, aisle width or workshop layout favour side operation over front-only access.

For workshops where the machine sits against a wall, beside bending equipment or in a narrow bay where front access alone would slow every load cycle.

Automatic shuttle exchange

Dual tables swap in approximately 15 seconds while the laser continues cutting on the alternate bed. The operator prepares the next sheet outside the cutting zone — so machine time is spent cutting, not waiting for manual loading cycles between programmes.

For workshops where daily output depends on how many sheets move through the shift, not how fast one operator can reload a single table.

Higher production output

Shuttle automation removes the dead time between sheets that limits open-bed machines in production environments. With 3kW, 6kW and 12kW options, the FB Series scales source output to heavier plate and faster cycles as daily volume grows.

Suited to subcontract businesses quoting on daily sheet volume and delivery reliability.

Less operator waiting

Loading, alignment and part removal happen on the exchange table outside the enclosed cutting zone while the laser cuts on the alternate bed. Side access makes each waiting-table cycle quicker to reach — operators stay productive rather than standing idle while the previous sheet finishes.

Important when labour is already committed across bending, welding and assembly — laser cutting must not become the bottleneck.

Industrial reliability

Heavy welded frame, stress-relieved bed, rack and pinion transmission and high-strength aluminium gantry are specified for production duty — approximately 6000 kg machine weight and up to 1100 kg table load for heavier plate programmes.

When repeat orders depend on the third batch matching the first — not just commissioning samples.

Future production growth

Side-access shuttle automation is the step many workshops take when open-bed output is no longer enough and compact shuttle platforms lack power or plate capacity. The FB Series delivers production throughput with practical daily access across F3015B and F4020A formats.

For owners who know daily sheet volume is growing and need a machine sized for that trajectory.

Compare with /fiber-laser-cutters/titan-fc-series-flatbed-fibre-lasers/