01
Fibre laser
Vector FL60 Fibre Laser
Compact Fibre Laser
For small workshops and first-time laser buyers.
- 1.5kW–3kW
- 600×600mm Bed
- Small Footprint
- 1.5kW to 3kW power options.
- 600×600mm cutting bed.
- UK-manufactured V-CUT control system.
METAL CUTTING SOLUTIONS
Fibre Laser Cutters for Ireland
Flatbed, tube and combination fibre laser cutting systems — up to 20kW as standard, with up to 60kW available on special order — backed by installation, training, service and spare parts support.
- Flatbed, tube & combination systems
- Mild steel, stainless steel & aluminium
- Installation, training & support
- Up to 20kW standard · 60kW on special order
Fibre laser cutters
Fibre Laser Cutting Machines for Ireland
Vector compact fibre lasers and Titan production flatbed and tube platforms for metal cutting — V-CUT and V-CAM control on Vector from 600 × 600 mm through FL250/300, plus Titan open-bed sheet and tube systems from 3kW upwards. Compare models below or speak with the Ireland team about power and configuration.
02
Fibre laser
Vector FL90 Fibre Laser
Workshop Production
Extra cutting area for growing fabrication businesses.
- 1.5kW–3kW
- 1300×900mm Bed
- Growing Workshops
- 1.5kW to 3kW power options.
- 1300×900mm cutting bed.
- UK-manufactured V-CUT control system.
03
Fibre laser
Vector FL130 Fibre Laser
Most Popular Choice
Balanced capacity for engineering and manufacturing.
- 1.5kW–3kW
- 1300×1300mm Bed
- Higher Throughput
- 1.5kW to 3kW power options.
- 1300×1300mm cutting bed.
- UK-manufactured V-CUT control system.
04
Fibre laser
Vector FL250/300 Range
Industrial Production
Large-format cutting and higher power for demanding environments.
- Up to 12kW
- Production Systems
- 1.5kW to 12kW power options.
- FL250.
- CypCut control with Raytools autofocus cutting heads.
Production fibre lasers
Titan Fibre Laser Cutting Machines
Production flatbed and tube fibre lasers with open-bed or dual-shuttle platforms — supplied, installed and supported in Ireland by Mantech.
01
Fibre laser
Titan N Series
3kW–20kW
Ideal for: Dependable sheet cutting without shuttle-table complexity — N3015 (3000 × 1500 mm), N4020 (4000 × 2000 mm) and N6025 (6000 × 2500 mm) on the same open-bed platform.
- Open bed loading
- Three formats
- First production laser
02
Fibre laser
Titan FC Series
3kW–12kW
Ideal for: Production-focused dual-shuttle range — F3015C (3000 × 1500 mm) and F6025C (6000 × 2500 mm).
- Shuttle exchange
- Two formats
- Continuous output
03
Fibre laser
Titan FB Series
3kW–12kW
Ideal for: Dual-shuttle production platform with lateral loading access — F3015B (3000 × 1500 mm) and F4020A (4000 × 2000 mm).
- Side-door access
- Shuttle exchange
- Production sheet
04
Fibre laser
Titan FP Series
3kW–20kW
Ideal for: Highest-performance Titan flatbed range with premium motion system — FP3015 (3000 × 1500 mm), FP4020 (4000 × 2000 mm) and FP6025 (6000 × 2500 mm).
- Premium motion
- High power
- Production throughput
05
Fibre laser
Titan T6524
3kW–6kW
Ideal for: Production pipe and profile cutting on a vertical 2-chuck system.
- Round & square tube
- 2-chuck system
- Profile cutting
Fibre laser technology
Metal cutting · High speed · High precision
What Is Fibre Laser Cutting?
Fibre laser cutting uses a focused high-powered laser beam to cut metal sheet and tube with speed, accuracy and clean edge quality.
Metal fabrication
Fibre lasers are used to process mild steel, stainless steel, aluminium, brass and copper for manufacturing and fabrication.
Fast, clean cutting
The focused fibre laser beam creates accurate cuts with minimal heat distortion, low maintenance and reduced tooling wear.
UK production environments
Ideal for sheet metal workshops, fabrication companies, engineering firms and manufacturers requiring reliable metal cutting output.
Materials
Mild steel · Stainless steel · Aluminium · Brass · Copper
Applications
Fabrication · Engineering · Manufacturing · Sheet metal work
Power range
Up to 20kW standard · up to 60kW on special order
Precision & speed
Clean edges · Fast processing · Low maintenance
Fibre laser cutter in a UK metal fabrication workshop
A fibre laser is a high-powered laser cutting technology used to process metal materials such as mild steel, stainless steel, aluminium, brass and copper with exceptional speed and precision. Fibre laser cutting machines use a focused laser beam generated through fibre optic amplification, allowing for fast, clean cuts with minimal maintenance and no tooling wear. Widely used in fabrication, engineering and manufacturing, fibre lasers provide an efficient, cost-effective solution for high-quality metal cutting across UK industries.
Platform choice usually comes before kW — flat sheet, tube, or a bit of both. Our buyer's guide works from parts and nests through format and support; the materials guide covers metals, thickness and cut videos; stainless and aluminium covers those two job types. The power guide explains what each kW tier means day to day. Ownership drivers sit in the fibre laser cost guide. For starting cut settings use the cut parameter tool; if you are weighing in-house work against subcontract quotes, the ROI calculator is a sensible next step.
Start the shortlist with our fibre laser buyer’s guide — work mix, bed format, table architecture, software and supplier proof. Check power, extraction and floor space in the installation requirements guide before you book a delivery date. Not sure whether fibre is right for the work you do? Start with our fibre laser applications guide. You can also see how manufacturers are using Mantech machinery in our customer case studies. When you are ready to build a budget, the fibre laser cost guide explains the main factors that affect the investment. If you are still comparing technologies, our fibre versus CO₂ guide sets out where each process works best. If joining is also part of the workflow, compare our TRM handheld fibre laser welders.
Installed & Supported
Why Choose ManTech For Fibre Laser Cutters?
Installation available. Installed and trained & supported.
- Installed & Supported
- Finance Available
- Live Machine Demos
- Nationwide Service
- Fibre Laser Installations
Proven Experience
decades supplying and supporting industrial machinery across Ireland & Ireland
Reliable Performance
machines selected for durability, accuracy, and long-term operation
Long-Term Support
installation, training, service, and spares support throughout the machine lifecycle
Installed & Supported
COMPETITIVE PRICING
We offer a wide range of fibre laser cutting machines at highly competitive prices.
DELIVERY SUPPORT
Every fibre laser cutter includes standard delivery. Need help with offloading and siting?
OPERATOR TRAINING INCLUDED
Each system comes with comprehensive operator training as standard.
LONG-TERM AFTERCARE
Our in-house service desk and field engineers provide fast, effective support across Ireland.
CUTTING SOFTWARE INCLUDED
All machines include powerful cutting software with features like nesting, fly-cutting, and edge-seek detection.
INSTALLATION INCLUDED
All Mantech fibre lasers come with professional installation by our in-house engineers.
ENGINEERING TEAM
Our support and engineering teams are based at our HQ.
25+ YEARS EXPERIENCE
With more than two decades of experience in supplying industrial cutting equipment, we've built a solid reputation for dependable machines and honest, practical support.
For longer customer outcomes alongside install photography, read our case studies archive, then browse Installations for commissioned Vector and Titan platforms on real shop floors.
Sheet Metal Fabrication
Mantech Machinery is proud to announce another successful installation and commissioning of a Vector FL300 Fibre Laser Cutter—this time for a leading Roofing Structure Fabrication firm in Ongenstown, Navan, Ireland.
View install
Manufacturing
Precision and power – that’s what a leading — based manufacturer gained with the installation of the SF3015H Fibre Laser Cutter, supplied by Mantech Machinery.
Sign Making
In the competitive world of signage, precision and efficiency are non-negotiable.
View install
Engineering & Subcontract
We are delighted to announce the successful installation and full commissioning of a Vector FL250 Fibre Laser Cutter for Skilled Engineering.
View install
Education & Training
Our fibre laser installation team have recently completed another successful project for one of our long-standing educational customers – Huddersfield University.
View install
Stainless Fabrication
We’re proud to announce another successful Vector FL250 Fibre Laser Cutter installation — this time at Imperial Locks, a leading lock and security product manufacturer based in Willenhall,.
View install
Precision Components
We’re proud to announce another successful Fibre Laser Cutter installation — this time for a new Mantech customer based in Wednesbury,, who specialises in bespoke heavy-duty storage equipment for the automotive and aerospace sectors.
View install
Specialist Fabrication
We’re proud to share another successful installation, this time for Taskamarine Limited, a family-owned and operated marine business based in Ipswich with over 25 years of experience in dredging and marine construction.
View installMATERIAL CAPABILITY
What Can Fibre Laser Cutters Cut?
A fibre laser is a high-powered laser cutting technology used to process metal materials such as mild steel, stainless steel, aluminium, brass and copper with exceptional speed and precision.
Fibre laser cutting machines use a focused laser beam generated through fibre optic amplification, allowing for fast, clean cuts with minimal maintenance and no tooling wear.
Mild Steel
All of our fibre laser cutters are designed for cutting mild and carbon steel efficiently, with achievable thickness dependent on laser power, cutting head, and gas selection.
Stainless Steel
Fibre lasers excel at high-accuracy stainless steel cutting, producing clean edges and consistent results across a wide range of thicknesses.
Aluminium
Aluminium can be cut reliably on a fibre laser with the correct machine configuration and parameters. Our engineers can advise on the best setup for this highly reflective material.
Brass
Brass is a highly reflective metal and requires suitable cutting head protection and carefully controlled parameters to be processed safely and effectively on a fibre laser.
Copper
Copper is also highly reflective and, like brass, requires appropriate cutting head protection and precise parameter control for safe and consistent fibre laser cutting.
Titanium
Titanium can be cut efficiently on a fibre laser using appropriate assist gases and optimised cutting parameters, making it suitable for specialist and aerospace applications.
PRODUCTION SETUP
Supporting Equipment for Fibre Laser Cutting
Fibre laser cutting systems rely on correctly specified supporting equipment to maintain safe operation, protect machine components, and ensure consistent cutting performance. This includes extraction systems, compressed air supply, and other integrated utilities essential to reliable production environments.
Key Supporting Systems for Fibre Laser Cutting
Fume & Dust Extraction Systems
- Removes fumes and fine metal particulates generated during cutting
- Supports operator safety and workplace compliance
- Helps protect sensitive machine components and optics
Compressed Air for Fibre Laser Cutting
- Provides stable assist air for mild steel cutting
- Supports cutting head operation and optics protection
- Systems specified to suit laser power and duty cycle
Specification & Integration Support
- Guidance on selecting suitable extraction and air supply systems
- Support with integration alongside fibre laser cutting machines
- Solutions matched to real-world production environments
Selection guidance
Choosing the Right Fibre Laser for Your Business
Selecting the right fibre laser cutter depends on your materials, production volume, available space, and future growth plans. Below is a simple guide to help you identify the most suitable fibre laser solution for your business.
Smaller workshops
Who it’s for: Ideal for small workshops, start-ups, and businesses bringing laser cutting in-house for the first time.
Mild steel, stainless steel, aluminium
Lower to mid-range thicknesses
Recommended fibre laser: Vector FL60 / FL90 Fibre Laser Cutters
Why: These machines offer reliable cutting performance, manageable operating costs, and a compact design, making them well suited to workshops with limited space or evolving production needs.
View Vector FL60 & Vector FL90 Fibre Lasers →
Growing manufacturers
Who it’s for: Designed for growing manufacturers and fabrication businesses with increasing throughput requirements.
Recommended fibre laser: Vector FL130 Fibre Laser Cutter
Why:The Vector FL130 provides a strong balance between cutting power, speed, and versatility, making it suitable for businesses moving from job-based cutting to more structured production workflows.
View Vector FL130 Fibre Laser →
High-volume production
Who it’s for: Best suited to high-volume production environments where speed, consistency, and uptime are critical.
High output expectations
Recommended fibre laser: Vector FL250 / 300 Fibre Laser Cutters
Why: These machines are engineered for demanding production environments, offering higher power options, larger cutting areas, and the performance required to support long production runs.
These options are typically selected where higher power, larger formats, or specific budget requirements apply.
Recommended fibre laser: Titan FC Series Flatbed Fibre Lasers
Production-focused dual-shuttle range — F3015C (3000 × 1500 mm) and F6025C (6000 × 2500 mm).
Recommended fibre laser: Titan FP Series Flatbed Fibre Lasers
Highest-performance Titan flatbed range with premium motion system — FP3015 (3000 × 1500 mm), FP4020 (4000 × 2000 mm) and FP6025 (6000 × 2500 mm).
Restricted floor space
Who it’s for: Suitable for businesses with restricted floor space or specialist site constraints.
Recommended fibre laser: Compact Vector Fibre Laser Configurations
Why: With carefully planned machine layouts and configuration options, fibre laser systems can be installed efficiently even in space-limited environments without compromising cutting performance.
Vector FL250 / FL300
Titan FC Series
Titan FP Series
Our team regularly supports customers through machine selection, site planning, installation, and long-term service, ensuring each fibre laser solution is matched to real-world production requirements.
Speak to an Engineer About Your Space →MODEL SELECTION
Fibre Laser Cutter Model Comparison
Compare our fibre laser cutter range below to identify the most suitable machine based on cutting area, power options, and production requirements.
Selecting the right fibre laser cutter depends on your materials, production volume, available space, and future growth plans.
Cutting performance and maximum thickness depend on laser power, material type, and machine configuration. Reflective metals such as brass and copper require suitable cutting head protection.
Previous SF machines are covered by the current Vector and Titan ranges below.
Production platforms
Titan production fibre lasers
These options are typically selected where higher power, larger formats, or specific budget requirements apply.
-
3kW–20kW
Titan N Series
Single-table N3015, N4020 & N6025 — 3kW to 20kW
Dependable sheet cutting without shuttle-table complexity — N3015 (3000 × 1500 mm), N4020 (4000 × 2000 mm) and N6025 (6000 × 2500 mm) on the same open-bed platform.
Single-table N3015, N4020 & N6025 — 3kW to 20kW
- Open bed loading
- Three formats
- First production laser
-
3kW–12kW
Titan FC Series
Dual shuttle F3015C & F6025C — 3kW to 12kW
Production-focused dual-shuttle range — F3015C (3000 × 1500 mm) and F6025C (6000 × 2500 mm).
Dual shuttle F3015C & F6025C — 3kW to 12kW
- Shuttle exchange
- Two formats
- Continuous output
-
3kW–12kW
Titan FB Series
Side-door dual shuttle F3015B & F4020A — 3kW to 12kW
Dual-shuttle production platform with lateral loading access — F3015B (3000 × 1500 mm) and F4020A (4000 × 2000 mm).
- Side-door access
- Shuttle exchange
- Production sheet
-
3kW–20kW
Titan FP Series
Premium dual shuttle FP3015, FP4020 & FP6025 — 3kW to 20kW
Highest-performance Titan flatbed range with premium motion system — FP3015 (3000 × 1500 mm), FP4020 (4000 × 2000 mm) and FP6025 (6000 × 2500 mm).
- Premium motion
- High power
- Production throughput
- Tube platform
3kW–6kW
Titan T6524
Tube & profile cutting — 3kW or 6kW
Production pipe and profile cutting on a vertical 2-chuck system.
- Round & square tube
- 2-chuck system
- Profile cutting
Compact & mid-format
Vector range comparison
Workshop and mid-format fibre lasers for smaller beds and growing fabrication capacity.
-
Compact Fibre Laser.
Vector FL60 Fibre Laser
Entry-level metal cutting & compact workshops
With its 600 x 600 mm cutting table, the FL60 Fibre Laser delivers a compact yet powerful solution, perfect for small workshops, educational institutions, and fabrication environments. Designed for efficiency and ease of use, this system combines high performance with affordability, making advanced laser technology accessible to a wider audience.- 1.5kW–3kW
- 600×600mm Bed
- Small Footprint
-
Workshop Production.
Vector FL90 Fibre Laser
Small workshops needing more table space
The Vector FL90 is designed for fabrication businesses that require compact, enclosed fibre laser cutting capability without moving to full-size sheet processing platforms. With a 1300 × 900 mm cutting area and flexible power configurations, the FL90 offers a balanced solution for precision component cutting and medium-gauge sheet fabrication within a controlled footprint.- 1.5kW–3kW
- 1300×900mm Bed
- Growing Workshops
-
Most Popular Choice.
Vector FL130 Fibre Laser
Growing fabrication businesses
The Vector FL130 provides a strong balance between cutting power, speed, and versatility, making it suitable for businesses moving from job-based cutting to more structured production workflows.- 1.5kW–3kW
- 1300×1300mm Bed
- Higher Throughput
-
Industrial Production.
Vector FL250/300 Range
Production environments & high throughput
These machines are engineered for demanding production environments, offering higher power options, larger cutting areas, and the performance required to support long production runs.- Up to 12kW
- Production Systems
Control & software
Control Systems & Software Platforms
Our fibre laser cutters are supplied with integrated machine control and production software. FL60, FL90 and FL130 systems feature Mantech's UK-Designed V-CUT platform, while selected high-power flatbed, tube and combination systems utilise specialist CypCut, CypTube and HypCut software for advanced production environments.
V-CUT
- UK-Designed
- Engineering support
- Direct Mantech assistance
- FL60 / FL90 / FL130 models
CypCut / CypTube / HypCut
- Industry-standard platforms
- Advanced automation features
- Higher-power production systems
- FL250 / FL300 / Titan models
UK-Designed control system
Exclusive to FL60 • FL90 • FL130
UK-Designed V-CUT Control System
FL60, FL90 and FL130 models are supplied with V-CUT, Mantech's UK-Designed fibre laser control system built for simple operation, reliable cutting workflows and direct support from our Engineering Team.
Supported directly by Mantech engineers in Ireland with software assistance, training, commissioning support and ongoing technical guidance.
- UK-Designed platform
- Direct support
- Simple operation
CypCut Control Software
CypCut
FL250 and FL300 models utilise CypCut control software for high-power flatbed cutting applications.
Designed for production environments requiring advanced automation, intelligent nesting workflows, process monitoring and efficient batch manufacturing.
Suitable for larger cutting formats, higher laser powers and demanding fabrication operations.
- Advanced automation
- Production monitoring
- High-power cutting
Specialist Production Software
Selected Titan flatbed, tube and combination systems utilise specialist software platforms including CypCut, CypTube and HypCut depending on machine configuration.
These platforms provide advanced tube processing, profile cutting, bevel preparation, automation features and production management tools for specialist fabrication environments.
Specialist Platforms
- Tube processing
- Bevel cutting
- Advanced fabrication
Fibre laser support
Your FAQs Answered
How much does a fibre laser cutter cost?
Cost follows laser power, bed size, automation and whether you need a compact Vector or a production Titan. Mantech does not publish list prices. The fibre laser cost guide explains what changes the quote; we then price a machine against your parts and nest.
What maintenance is required for a fibre laser cutter?
Fibre laser cutters generally require less maintenance than CO2 lasers, but regular upkeep is still important. Key maintenance tasks include: cleaning optics, inspecting and cleaning the cutting head, checking coolant levels, lubricating moving parts, and replacing consumables as needed. Mantech Machinery offers preventative maintenance programmes to help you keep your machine in optimal condition.
What materials can a fibre laser cutter cut?
Fibre laser cutters are highly versatile and can cut a wide range of metals, including mild steel, stainless steel, aluminium, copper, brass, titanium, and more. The maximum thickness achievable depends on the laser power and material type.
Contact us to discuss your specific material-cutting needs, and our experts can advise on the appropriate machine and power level.
Does the Fibre Laser Come with Software?
Yes, all of our Fibre Laser Cutters come with integrated software and a built-in PC system for full machine control.
If you have specific software requirements or prior experience, our friendly fibre laser sales engineers are happy to assist in finding the best solution for your needs.
What Warranty Do You Offer with Your Fibre Laser Cutters?
All of our Fibre Laser Cutters come with a comprehensive 2-year warranty as standard.
Additionally, we provide lifetime technical support via telephone and email, ensuring you have ongoing access to expert assistance whenever you need it.
Do You Offer Extended Warranties?
Yes, we offer extended warranties on all of our Fibre Laser Cutters for up to 5 years, providing additional peace of mind and long-term protection for your investment.
Does Mantech Offer Service Agreements?
Yes, we provide customisable service-level agreements (SLAs) to support your Fibre Laser Cutter.
Fibre laser installs
Fibre Laser Installations
Thousands of machines installed across UK and Irish manufacturers and engineering companies
Horizontal list: use touch or trackpad to scroll and see more installation stories.
-
SF3015 Fibre Laser Cutter Installation – County Durham
View installation -
Vector FL90 3kW Fibre Laser Installed in Coventry
View installation -
Vector FL250 Fibre Laser Cutter Installation – West Yorkshire
View installation -
New Vector FL250 Fibre Laser Installation – Wokingham (3kW Configuration)
View installation -
SF3015 3kW Fibre Laser Installation – Wednesbury,
View installation -
Vector FL250 Fibre Laser Installation for Imperial Locks, Willenhall
View installation -
New Fibre Laser Installation – Shefford
View installation -
New Fibre Laser Installation – Huddersfield University
View installation -
New Fibre Laser Installation – Leicestershire
View installation -
3kW Vector FL90 Fibre Laser Cutter Installation in Tarleton
View installation -
Installation of a Vector FL250 Fibre Laser Cutter at Skilled Engineering
View installation -
Vector FL250 Fibre Laser Installation for Taskamarine
View installation -
Precision Meets Productivity – Lincolnshire Fibre Laser Installation
View installation -
Vector FL250 Fibre Laser Installation – 6 kW Power
View installation -
Smaller Footprint. Bigger Results. Vector FL90 Arrives in Birmingham.
View installation -
Precision Cutting in a Compact Package – Vector FL60 Installed in Cheshire
View installation
Additionally, we provide lifetime technical support via telephone and email, ensuring you have ongoing access to expert assistance whenever you need it.
Fibre Laser Cutters UK
Request a Quick Quotation
Additionally, we provide lifetime technical support via telephone and email, ensuring you have ongoing access to expert assistance whenever you need it.