Titan N Series Flatbed Fibre Lasers

The Titan N Series is a single-table flatbed fibre laser range for UK fabrication workshops that need dependable in-house sheet cutting — without committing to dual-shuttle production automation they may never fully utilise. The N3015 provides a 3000 × 1500 mm cutting area with 3kW, 6kW or 12kW power; the N4020 extends the same open-bed concept to 4000 × 2000 mm with 3kW, 6kW or 12kW; and the N6025 covers 6000 × 2500 mm sheet with 3kW, 6kW, 12kW or 20kW.

Across the range, sheet loads directly onto an open fixed table while the cutting head works inside a protected enclosed gantry. The N Series suits businesses moving up from plasma, bringing outsourced laser work back in-house, replacing ageing equipment, or buying a first production laser sized for real daily output — not maximum automated throughput.

Open sheet loading

Sheet loads directly onto the fixed 3000 × 1500 mm table from the front or sides. No shuttle alignment, no waiting for table exchange, no second bed consuming floor space. Handling stays familiar — overhead crane, barrow or two-person lift — which matters when every job uses a different sheet size.

Suited to job shops where setup speed and flexible handling matter more than automated table changeover.

Compact workshop footprint

The single-table layout is substantially shorter than a dual-shuttle system. That makes it realistic to place an N Series machine in an existing bay rather than reorganising the whole shop around a production line footprint.

Ideal when floor space is already committed to welding, bending and assembly — and laser cutting must fit alongside.

Enclosed gantry cutting zone

The moving gantry encloses the area where the laser beam is active — containing stray light and supporting extraction — while the open bed keeps loading straightforward. Laser safety where cutting happens, without the bulk and access constraints of a full cabinet machine.

Works well in busy workshops that need compliant laser containment without complicating daily sheet handling.

Scalable laser power

Choose 3kW, 6kW or 12kW on the same platform. Match capital spend to your current material mix rather than buying shuttle-line throughput you will not use for several years.

For workshops planning growth — start at the tier that fits today’s quoting profile and upgrade source output later if demand increases.

Straightforward ownership

Fewer moving systems than a shuttle exchange line means simpler commissioning, lower capital outlay and less that can interrupt production. Maintenance and daily operation stay within reach of a workshop supervisor, not a dedicated laser cell team.

A commercially sensible specification when dependable cutting matters more than maximum automated output.

Sensible first production laser

Purpose-built for fabrication businesses taking their first step into fibre laser cutting, bringing bureau work back in-house, or stepping up from plasma. Dependable daily capability sized for real workshop production volumes.

For owners who want to prove in-house laser cutting before committing to a longer shuttle-table production system.