Kemper LaserFil Pro 3720 Fibre Laser Extraction System
Mantech specifies Kemper LaserFil Pro 3720 for Vector FL250 and FL300 installations — Industrial fume extraction for continuous fibre laser cutting — specified for FL250 and FL300 installations up to high-duty production workloads.
Industrial extraction sized for production flatbed fibre laser cells — integrating with enclosed cabinet extraction points, duty cycle and laser power during installation. Mantech engineers confirm extraction airflow and duct routing before commissioning.
Typical applications
Vector FL250 & FL300 platforms
Continuous production cutting
Single or multiple stations
Higher dust volumes
Why workshop extraction matters
Mantech specifies Kemper LaserFil Pro 3720 for Vector FL250 and FL300 installations — Industrial fume extraction for continuous fibre laser cutting — specified for FL250 and FL300 installations up to high-duty production workloads.
Industrial extraction sized for production flatbed fibre laser cells — integrating with enclosed cabinet extraction points, duty cycle and laser power during installation. Mantech engineers confirm extraction airflow and duct routing before commissioning.
Workshop risks without proper extraction include fine particulate exposure, production fume at source, dust on adjacent machinery, continuous-duty air quality.
Key features
High-performance filtration
High-performance filtration for fine metal particulate capture
Production flatbed duty
Sized for production flatbed fibre laser duty cycles
Cabinet integration
Integrated with enclosed cabinet extraction points at installation
Workshop benefits
LaserFil Pro 3720 supports effective dust capture at Vector FL250 and FL300 cutting cells — helping maintain stable air conditions during continuous production and limiting dust build-up on surrounding infrastructure.
Matched to FL250 & FL300
Sized for industrial enclosed flatbed platforms — specified alongside your laser power configuration, materials and production duty cycle during Mantech installation.
Production rated
Higher-capacity extraction for continuous or extended fibre laser cutting cycles — beyond compact mobile extraction units.
Sustained filter performance
Integrated cleaning supports consistent extraction through production shifts — matched to higher dust volumes from flatbed metal cutting.
UK specification & install
Mantech engineers confirm extraction airflow, compressed air capacity and electrical supply before installation — matched to laser power, materials, duty cycle and workshop layout.
Mantech engineers confirm extraction airflow, laser power, materials, cutting hours and workshop layout before installation — matched to your Vector FL250 or FL300 production requirements.
Performance & installation
Mantech engineers confirm extraction airflow, laser power, materials, cutting hours and workshop layout before installation — matched to your Vector FL250 or FL300 production requirements.
Filtration: High-performance cartridge filtration · fine metal particulate
Typical duty: Continuous production · flatbed fibre laser cutting
Platform match: Vector FL250 · Vector FL300
Dust volume: Higher volumes than compact extraction systems
Capture at install: Enclosed cabinet extraction points · fixed ducting
Step-up alternative: Kemper LaserFil Pro 3730 for 12kW high-duty production
Unit type: Industrial LaserFil Pro extraction system
Capture interface: Integrated with enclosed cabinet extraction at install
Exhaust arm: Not standard — fixed ducting from laser enclosure
Integration: Specified with Vector FL250 or FL300 during Mantech installation
Recommended for: Production flatbed fibre laser cutting
Compact alternative: Kemper MaxiFil Clean for mid-format enclosed cells
Kemper extraction range
Kemper MaxiFil Clean
Compact extraction for light to medium duty fibre laser cutting
Mid-format enclosed cells
Single cutting stations
Moderate dust volumes
Kemper LaserFil Pro 3720
High-performance extraction for production fibre lasers
Vector FL250 & FL300 platforms
Continuous production environments
Higher dust volumes
Kemper LaserFil Pro 3730
Higher-capacity extraction for 12kW production
High-power fibre lasers
Multi-shift production
Very high dust volumes
Is the Kemper LaserFil Pro 3720 suitable for fibre laser cutting?
Yes. Industrial fume extraction for continuous fibre laser cutting — specified for FL250 and FL300 installations up to high-duty production workloads. Mantech specifies LaserFil Pro 3720 for Vector FL250 and FL300 installations where extraction demand exceeds compact mobile systems.
Is the LaserFil Pro 3720 suitable for continuous operation?
Yes. LaserFil Pro 3720 is intended for continuous or extended fibre laser cutting operations in fabrication and production environments — sized for higher dust volumes than MaxiFil Clean or FilterMaster XL.
What type of fibre laser cutting applications is the 3720 best suited to?
LaserFil Pro 3720 is typically specified for medium-power production fibre laser cutters on Vector FL250 and FL300 flatbed platforms — continuous production environments with higher dust volumes than compact extraction can manage.
How is the LaserFil Pro 3720 connected to a fibre laser cutting machine?
Connection is via fixed ducting from the enclosed laser cabinet or configured extraction points — integrated during Mantech installation. Flexible extraction arms are not standard for flatbed fibre laser cutting cells.
When would a LaserFil Pro 3730 be more suitable?
For high-power fibre lasers, multi-shift production or very high dust volumes on FL250/FL300 configurations, Kemper LaserFil Pro 3730 may be the more appropriate extraction solution.
Kemper LaserFil Pro 3720 Fibre Laser Extraction System
Typical Fibre Laser Applications
Medium-power fibre laser cutters
Continuous duty cutting operations
Single or multiple cutting stations
Fabrication and production workshop environments
Designed for Fibre Laser Cutting Environments
Kemper LaserFil Pro 3720 – Key Features
High-Performance Filtration
Continuous Duty Operation
Increased Airflow Capacity
Automatic Filter Cleaning
Flexible System Integration
Workshop Environment & Practical Benefits
Specification & Application Guidance
Technical Specifications – Kemper LaserFil Pro 3720
Filtration & Performance
Airflow & Power
Physical & Installation Data
Where the LaserFil Pro 3720 Fits in the Kemper Range
Kemper MaxiFil Clean
Kemper LaserFil Pro 3720
Kemper LaserFil Pro 3730
Kemper LaserFil Pro 3720 – Frequently Asked Questions
Is the Kemper LaserFil Pro 3720 suitable for fibre laser cutting?
Is the LaserFil Pro 3720 suitable for continuous operation?
What type of fibre laser cutting applications is the 3720 best suited to?
How is the LaserFil Pro 3720 connected to a fibre laser cutting machine?
When would a LaserFil Pro 3730 be more suitable?
Can Mantech Machinery help specify the correct system?
Talk to Us About the Kemper LaserFil Pro 3720
Get a Kemper Extraction System Quote
The Kemper LaserFil Pro 3720 is typically specified for the following fibre laser cutting scenarios:
Fibre laser cutting generates very fine metal particulates that require effective filtration. Compared to other cutting processes, fibre lasers produce a higher proportion of fine airborne dust, making suitable extraction particularly important in metal cutting environments.
The Kemper LaserFil Pro 3720 is designed to support fibre laser cutting applications with higher dust volumes and continuous operating demands, providing effective dust capture close to the cutting source and helping to maintain stable air conditions in production and fabrication environments.
Cartridge filtration designed to handle higher volumes of fine metal dust generated by fibre laser cutting.
Designed for continuous fibre laser cutting in production environments with increased extraction demands.
Higher airflow performance compared to compact extraction units, supporting more demanding cutting applications.
Integrated cleaning system helps maintain consistent extraction performance during continuous operation.
Suitable for connection to fibre laser cutting systems using fixed ducting or configured extraction points.
For high-power fibre lasers or heavy-duty, multi-shift production environments, the LaserFil Pro 3730 may be more appropriate.
In fibre laser cutting environments with continuous production, effective extraction plays a key role in maintaining stable and controlled workshop conditions. By reducing the circulation of fine metal dust, suitable extraction systems help support consistent air quality within and around the cutting area.
In medium-duty fibre laser cutting applications, the Kemper LaserFil Pro 3720 supports cleaner production environments by helping to limit dust build-up on surrounding machinery and infrastructure, contributing to improved operational reliability and reduced housekeeping requirements.
The Kemper LaserFil Pro 3720 is intended for fibre laser cutting applications where extraction demand is higher and continuous operation is required. Correct specification depends on factors such as laser power, materials being cut, cutting hours, and the volume of dust generated.
The LaserFil Pro 3720 is typically suitable for:
Medium-power fibre laser cutters
Continuous or extended cutting cycles
Single or multiple cutting stations
Applications generating higher dust volumes
For high-power fibre lasers, multi-shift production, or applications with very high dust loads, the Kemper LaserFil Pro 3730 may be more appropriate.
The following technical data is provided for reference. Suitability for fibre laser cutting applications depends on correct system specification.
Exhaust arms or duct connections are supplied depending on application and system configuration. Fibre laser cutting installations typically use fixed ducting rather than flexible extraction arms.
Positioning: Compact extraction for light to medium duty fibre laser cutting
Lower-power fibre laser cutters
Single cutting stations
Moderate dust volumes
Positioning: High-performance extraction for continuous fibre laser cutting
Medium-power fibre lasers
Continuous production environments
Positioning: Industrial extraction for high-power fibre laser cutting
High-power fibre lasers
Heavy-duty, multi-shift production
Demanding industrial environments
Yes. The Kemper LaserFil Pro 3720 is designed for fibre laser cutting applications that generate higher dust volumes and require continuous extraction during production.
Yes. The LaserFil Pro 3720 is intended for continuous or extended fibre laser cutting operations in fabrication and production environments.The MaxiFil Clean is intended for light to medium duty fibre laser cutting. For heavier-duty continuous production or higher dust volumes, Kemper LaserFil Pro systems may be more appropriate.
The LaserFil Pro 3720 is typically specified for medium-power fibre laser cutters operating in continuous production environments with higher dust volumes than compact extraction systems can manage.
Connection method depends on the laser system and installation requirements. Fibre laser cutting applications typically use fixed ducting from the laser enclosure or extraction points rather than flexible extraction arms.
For high-power fibre lasers, multi-shift production, or very high dust volumes, the Kemper LaserFil Pro 3730 may be a more appropriate extraction solution.
Yes. Mantech Machinery can advise on the correct Kemper extraction system based on your fibre laser cutter, materials, cutting hours, and production requirements.
If you’re considering the Kemper LaserFil Pro 3720 for a fibre laser cutting application, speak to Mantech Machinery for advice on correct system specification, integration, and pricing.
Get a Quote for the LaserFil Pro 3720
