Kemper LaserFil Pro 3730 Fibre Laser Extraction System
Mantech specifies Kemper LaserFil Pro 3730 for Vector FL250 and FL300 high-duty installations — Step-up Kemper extraction for higher-power FL250/FL300 configurations, heavier-duty continuous production and increased dust volumes.
Industrial extraction sized for high-power flatbed fibre laser cells — integrating with enclosed cabinet extraction points, multi-shift duty cycles and laser power during installation. Mantech engineers confirm extraction airflow and duct routing before commissioning.
Typical applications
High-power fibre laser cutters
Heavy-duty, multi-shift cutting
High-throughput cutting stations
Very high dust volumes
Why workshop extraction matters
Mantech specifies Kemper LaserFil Pro 3730 for Vector FL250 and FL300 high-duty installations — Step-up Kemper extraction for higher-power FL250/FL300 configurations, heavier-duty continuous production and increased dust volumes.
Industrial extraction sized for high-power flatbed fibre laser cells — integrating with enclosed cabinet extraction points, multi-shift duty cycles and laser power during installation. Mantech engineers confirm extraction airflow and duct routing before commissioning.
Workshop risks without proper extraction include fine particulate exposure, production fume at source, dust on adjacent machinery, multi-shift air quality.
Key features
Higher airflow capacity
Higher airflow capacity for 6kW–12kW production configurations
High-duty industrial fabrication
Built for sustained high-duty industrial fabrication
Engineer commissioning
Specified and ducted by Mantech engineers at commissioning
Workshop benefits
LaserFil Pro 3730 supports effective dust capture at Vector FL250 and FL300 cutting cells — helping maintain stable air conditions during intensive production and limiting dust build-up on surrounding infrastructure.
Matched to FL250 & FL300
Sized for high-power industrial flatbed platforms — specified alongside your laser power configuration, materials and multi-shift duty cycle during Mantech installation.
12kW rated
Step-up extraction capacity for 6kW–12kW production configurations — beyond LaserFil Pro 3720 and compact mobile systems.
Sustained filter performance
Automatic filter cleaning supports consistent extraction through multi-shift production — matched to very high dust volumes from high-power metal cutting.
UK specification & install
Mantech engineers confirm extraction airflow, compressed air capacity and electrical supply before installation — matched to laser power, materials, duty cycle and workshop layout.
Mantech engineers confirm extraction airflow, laser power, materials, cutting hours and workshop layout before installation — matched to your Vector FL250 or FL300 high-duty production requirements.
Performance & installation
Mantech engineers confirm extraction airflow, laser power, materials, cutting hours and workshop layout before installation — matched to your Vector FL250 or FL300 high-duty production requirements.
Filtration: High-capacity cartridge filtration · fine metal particulate
Typical duty: Multi-shift production · high-power fibre laser cutting
Platform match: Vector FL250 · Vector FL300 · 6kW–12kW configurations
Dust volume: Very high volumes · demanding industrial environments
Capture at install: Enclosed cabinet extraction points · fixed ducting
Step-down alternative: Kemper LaserFil Pro 3720 for medium-power continuous production
Unit type: Industrial LaserFil Pro extraction system
Capture interface: Integrated with enclosed cabinet extraction at install
Exhaust arm: Not standard — fixed ducting from laser enclosure
Compressed air: Required for automatic filter cleaning system
Integration: Specified with Vector FL250 or FL300 during Mantech installation
Recommended for: High-power flatbed fibre laser cutting · multi-shift duty
Kemper extraction range
Kemper MaxiFil Clean
Compact extraction for light to medium duty fibre laser cutting
Mid-format enclosed cells
Single cutting stations
Moderate dust volumes
Kemper LaserFil Pro 3720
High-performance extraction for production fibre lasers
Vector FL250 & FL300 platforms
Continuous production environments
Higher dust volumes
Kemper LaserFil Pro 3730
Higher-capacity extraction for 12kW production
High-power fibre lasers
Multi-shift production
Very high dust volumes
Is the Kemper LaserFil Pro 3730 suitable for high-power fibre laser cutting?
Yes. Step-up Kemper extraction for higher-power FL250/FL300 configurations, heavier-duty continuous production and increased dust volumes. Mantech specifies LaserFil Pro 3730 for Vector FL250 and FL300 installations where dust volumes are high and extraction demand is continuous across multi-shift production.
Can the LaserFil Pro 3730 support continuous operation?
Yes. LaserFil Pro 3730 is designed for continuous and extended duty operation, with high-capacity filtration and automatic filter cleaning to maintain stable extraction performance during production.
How does the LaserFil Pro 3730 differ from the LaserFil Pro 3720?
The LaserFil Pro 3730 is positioned above the 3720 in the Kemper range — offering higher extraction capacity, greater suitability for high-power fibre lasers and better performance in heavy-duty, multi-shift environments. The 3720 is typically used for medium-power systems, while the 3730 is specified for more demanding applications.
Can the LaserFil Pro 3730 be integrated into fixed ducting systems?
Yes. LaserFil Pro 3730 is designed for integration with fixed ducting, multiple extraction points or configured cutting stations depending on system design — specified and ducted by Mantech engineers at commissioning.
Does the LaserFil Pro 3730 require compressed air?
Yes. Compressed air is required for the automatic filter cleaning system, ensuring consistent extraction performance and longer filter life during sustained production duty.
Kemper LaserFil Pro 3730 Fibre Laser Extraction System
Typical Fibre Laser Applications
High-power fibre laser cutters
Heavy-duty, multi-shift cutting operations
Single or multiple high-throughput cutting stations
Industrial fabrication and manufacturing environments
Designed for Fibre Laser Cutting Environments
Kemper LaserFil Pro 3730 – Key Features
Industrial-Grade Filtration
Heavy-Duty, Multi-Shift Operation
Very High Airflow Capacity
Automatic Filter Cleaning
Industrial System Integration
Workshop Environment & Practical Benefits
Specification & Application Guidance
Technical Specifications – Kemper LaserFil Pro 3730
Filtration & Performance
Airflow & Power
Physical & Installation Data
Where the LaserFil Pro 3730 Fits in the Kemper Range
Kemper MaxiFil Clean
Kemper LaserFil Pro 3720
Kemper LaserFil Pro 3730
Kemper LaserFil Pro 3730 – Frequently Asked Questions
Is the Kemper LaserFil Pro 3730 suitable for high-power fibre laser cutting?
What type of workshops is the LaserFil Pro 3730 best suited to?
Can the LaserFil Pro 3730 support continuous operation?
What materials can be extracted with the LaserFil Pro 3730?
How does the LaserFil Pro 3730 differ from the LaserFil Pro 3720?
Is recirculated air possible with the LaserFil Pro 3730?
Does the LaserFil Pro 3730 require compressed air?
Can the LaserFil Pro 3730 be integrated into fixed ducting systems?
How do I know if the LaserFil Pro 3730 is the correct system for my application?
Talk to Us About the Kemper LaserFil Pro 3730
Get a Kemper Extraction System Quote
The Kemper LaserFil Pro 3730 is typically specified for the following high-demand fibre laser cutting scenarios:
Fibre laser cutting generates very fine metal particulates that require effective filtration. Compared to other cutting processes, fibre lasers produce a higher proportion of fine airborne dust, making suitable extraction particularly important in metal cutting environments.
The Kemper LaserFil Pro 3730 is engineered for fibre laser cutting applications with very high dust volumes and intensive, multi-shift operating demands, delivering robust dust capture close to the cutting source and supporting stable air conditions in demanding industrial production environments.
High-capacity cartridge filtration designed to handle very high volumes of fine metal dust generated by high-power fibre laser cutting.
Engineered for intensive fibre laser cutting in demanding industrial environments with continuous, multi-shift production requirements.
Industrial airflow performance designed to support high-power fibre lasers and high-throughput cutting operations.
Advanced automatic filter cleaning helps maintain stable extraction performance during prolonged and uninterrupted operation.
Designed for integration with enclosed fibre laser cutting systems using fixed ducting and engineered extraction points.
For lower-power fibre lasers or applications with reduced dust volumes, the LaserFil Pro 3720 or MaxiFil Clean may be more suitable.
In fibre laser cutting environments with intensive, high-throughput production, effective extraction plays a critical role in maintaining stable and controlled workshop conditions. By reducing the circulation of fine metal dust, suitable industrial extraction systems help support consistent air quality across demanding production areas
In heavy-duty fibre laser cutting applications, the Kemper LaserFil Pro 3730 supports cleaner industrial environments by helping to control dust build-up on surrounding machinery, infrastructure, and production equipment, contributing to improved system uptime, enhanced operator protection, and reduced maintenance and housekeeping requirements.
The Kemper LaserFil Pro 3730 is intended for fibre laser cutting applications where very high extraction demand and intensive, multi-shift operation are required. Correct specification depends on factors such as laser power, materials being cut, cutting hours, production intensity, and the volume of dust generated.
The LaserFil Pro 3730 is typically suitable for:
High-power fibre laser cutters
Heavy-duty, multi-shift cutting operations
Single or multiple high-throughput cutting stations
Applications generating very high dust volumes
For lower-power fibre lasers or applications with reduced cutting hours and dust volumes, the Kemper LaserFil Pro 3720 or MaxiFil Clean may be more appropriate.
The following technical data is provided for reference. Suitability for fibre laser cutting applications depends on correct system specification.
Connection method, ducting design, and system configuration depend on the fibre laser cutting system, enclosure design, and production requirements.
Positioning: Compact extraction for light to medium duty fibre laser cutting
Lower-power fibre laser cutters
Single cutting stations
Moderate dust volumes
Positioning: High-performance extraction for continuous fibre laser cutting
Medium-power fibre lasers
Continuous production environments
Positioning: Industrial extraction for high-power fibre laser cutting
High-power fibre lasers
Heavy-duty, multi-shift production
Demanding industrial environments
Yes. The LaserFil Pro 3730 is designed for high-power fibre laser cutting applications where dust volumes are high and extraction demand is continuous. It is intended for industrial production environments operating extended or multi-shift cutting cycles.
The LaserFil Pro 3730 is typically specified for industrial fabrication and production workshops, including environments with:
Multi-shift operation
Demanding dust loads from thick or high-power metal cutting
Yes. The system is designed for continuous and extended duty operation, with high-capacity filtration and automatic filter cleaning to maintain stable extraction performance during production.
The system is suitable for fine metal dust generated during fibre laser cutting, including carbon steel, stainless steel, aluminium, and other common laser-cut metals, subject to correct specification and system configuration.
The LaserFil Pro 3730 is positioned above the 3720 in the Kemper range and offers:
Higher extraction capacity
Greater suitability for high-power fibre lasers
Better performance in heavy-duty, multi-shift environments
The 3720 is typically used for medium-power systems, while the 3730 is specified for more demanding applications.
Yes. When correctly specified and installed, air recirculation is possible, subject to application, material being cut, and relevant workplace safety requirements. Final suitability should always be confirmed during system specification.
Yes. Compressed air is required for the automatic filter cleaning system, ensuring consistent extraction performance and longer filter life.
Yes. The LaserFil Pro 3730 is designed for integration with fixed ducting, multiple extraction points, or configured cutting stations depending on system design.
Correct specification depends on factors including:
Cutting hours and duty cycle
Dust volume generated
Mantech Machinery can assess your application and advise whether the LaserFil Pro 3730 is the correct solution or if an alternative Kemper system would be more appropriate.
If you’re considering the Kemper LaserFil Pro 3730 for a fibre laser cutting application, speak to Mantech Machinery for advice on correct system specification, integration, and pricing.
Get a Quote for the LaserFil Pro 3730
